4l60e 2wd To 4wd
I am building a trail truck with a 1998 4 3 6v and a 4l60e tranny.
4l60e 2wd to 4wd. I realize the 4l65e is a stronger transmission however being that it has a shorter awd 4wd output shaft i opted against it. 2 and 4wd models but most 2wd rides are 5 lug and 4wd are 6 bolt. Tail housing new housing to case o ring new extension housing seal new. How can i make it work good.
Will i have to put a 4wd programm in the pcm. Now my question how difficult is it to swap out the output shaft and the tailhousing from the s 10 to the z71 trans. It is now mated to a 4l60e 2wd i opted for this combo as it comes standard with a longer output shaft that is necessary for the aa adapter. Before anybody tells me to just get a 2wd transmission hear me out.
I have a 2wd 4l60e out of a 97 or 98 pick up and was wondering how hard it is would be to use this tranny to replace the same tranny in a 98 4wd truck. 4l60e hd transmission master conversion package 2wd non ls engines 1pc case the 4l60e master conversion package was designed for customers that are looking to convert their old 2 or 3 speed to the popular 4l60e automatic overdrive running a non ls style engine. Will it shift correctly at the right time. Rebuilt 2wd 6 bolt tail housing with 2wd output shaft will work for 98 up 4l60e 4l65e 4l70e with 2 piece case will not work for 1998 2002 f body camaro firebird with the torque arm mount however will replace the stock extension housing in f body applications if you have a torque arm mount relocating kit included.
Im going to put the engine and trans in my 2wd s10 but i need to get rid of the 4wd and t case. I have an old 4l60e out of my dads 96 gmc sonoma thats setup for 2wd but it has. Differential is the same for 1 2 ton trucks although early models 88 91 had fewer splines on axle shafts. I have a 5 3 4l60e 4wd combo that im pulling out of an 05 gmc yukon i assume it s a 4l60e corrrect me if im wrong.
Just talking about the transmissions. I have a 2004 5 3 with a 4wd 4l60e bolted to it and i also have a 2001 s 10 4l60e 2wd transmission. The complete axle assy may be the same bet. I have not looked in to it to much yet but thought someone.
I added a transfer case after the vss. Does it need to be completely torn down to replace the shaft to adapt to the tcase.
- Dana Super 70 Front Axle
- Dana 300 Twin Stick Conversion
- Dana 60 Lockout Hubs
- Dual Alternator Bracket Ford
- Drill Press Table Harbor Freight
- Dana 60 Lunchbox Locker
- Chit Chats Stuffed Animals
- Cj7 Rear Seat Brackets
- Dodge Ram 2500 Steering Wander
- Dodge Sno Commander For Sale
- Dana 30 Cv Axles
- Cummins Auto To Manual Swap Kit
- Double Flare Tool Napa
- Dynatrac Vs Carli Ball Joints
- Craftsman Torpedo Digital Level
- Dana 300 Transfer Case Identification
- Clayton Inn Clayton Ok
- Dana Super 60 Front Axle For Sale
- Costco Feit Led Shop Light
- Double Decker Car Hauler